Viewing file:  siginfo-consts.h (5.83 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* siginfo constants. Linux version.
Copyright (C) 1997-2018 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
<http://www.gnu.org/licenses/>. */
#ifndef _BITS_SIGINFO_CONSTS_H
#define _BITS_SIGINFO_CONSTS_H 1
#ifndef _SIGNAL_H
#error "Don't include <bits/siginfo-consts.h> directly; use <signal.h> instead."
#endif
/* Most of these constants are uniform across all architectures, but there
is one exception. */
#include <bits/siginfo-arch.h>
#ifndef __SI_ASYNCIO_AFTER_SIGIO
# define __SI_ASYNCIO_AFTER_SIGIO 1
#endif
/* Values for `si_code'. Positive values are reserved for kernel-generated
signals. */
enum
{
SI_ASYNCNL = -60, /* Sent by asynch name lookup completion. */
SI_TKILL = -6, /* Sent by tkill. */
SI_SIGIO, /* Sent by queued SIGIO. */
#if __SI_ASYNCIO_AFTER_SIGIO
SI_ASYNCIO, /* Sent by AIO completion. */
SI_MESGQ, /* Sent by real time mesq state change. */
SI_TIMER, /* Sent by timer expiration. */
#else
SI_MESGQ,
SI_TIMER,
SI_ASYNCIO,
#endif
SI_QUEUE, /* Sent by sigqueue. */
SI_USER, /* Sent by kill, sigsend. */
SI_KERNEL = 0x80 /* Send by kernel. */
#define SI_ASYNCNL SI_ASYNCNL
#define SI_TKILL SI_TKILL
#define SI_SIGIO SI_SIGIO
#define SI_ASYNCIO SI_ASYNCIO
#define SI_MESGQ SI_MESGQ
#define SI_TIMER SI_TIMER
#define SI_ASYNCIO SI_ASYNCIO
#define SI_QUEUE SI_QUEUE
#define SI_USER SI_USER
#define SI_KERNEL SI_KERNEL
};
# if defined __USE_XOPEN_EXTENDED || defined __USE_XOPEN2K8
/* `si_code' values for SIGILL signal. */
enum
{
ILL_ILLOPC = 1, /* Illegal opcode. */
# define ILL_ILLOPC ILL_ILLOPC
ILL_ILLOPN, /* Illegal operand. */
# define ILL_ILLOPN ILL_ILLOPN
ILL_ILLADR, /* Illegal addressing mode. */
# define ILL_ILLADR ILL_ILLADR
ILL_ILLTRP, /* Illegal trap. */
# define ILL_ILLTRP ILL_ILLTRP
ILL_PRVOPC, /* Privileged opcode. */
# define ILL_PRVOPC ILL_PRVOPC
ILL_PRVREG, /* Privileged register. */
# define ILL_PRVREG ILL_PRVREG
ILL_COPROC, /* Coprocessor error. */
# define ILL_COPROC ILL_COPROC
ILL_BADSTK /* Internal stack error. */
# define ILL_BADSTK ILL_BADSTK
};
/* `si_code' values for SIGFPE signal. */
enum
{
FPE_INTDIV = 1, /* Integer divide by zero. */
# define FPE_INTDIV FPE_INTDIV
FPE_INTOVF, /* Integer overflow. */
# define FPE_INTOVF FPE_INTOVF
FPE_FLTDIV, /* Floating point divide by zero. */
# define FPE_FLTDIV FPE_FLTDIV
FPE_FLTOVF, /* Floating point overflow. */
# define FPE_FLTOVF FPE_FLTOVF
FPE_FLTUND, /* Floating point underflow. */
# define FPE_FLTUND FPE_FLTUND
FPE_FLTRES, /* Floating point inexact result. */
# define FPE_FLTRES FPE_FLTRES
FPE_FLTINV, /* Floating point invalid operation. */
# define FPE_FLTINV FPE_FLTINV
FPE_FLTSUB /* Subscript out of range. */
# define FPE_FLTSUB FPE_FLTSUB
};
/* `si_code' values for SIGSEGV signal. */
enum
{
SEGV_MAPERR = 1, /* Address not mapped to object. */
# define SEGV_MAPERR SEGV_MAPERR
SEGV_ACCERR, /* Invalid permissions for mapped object. */
# define SEGV_ACCERR SEGV_ACCERR
SEGV_BNDERR, /* Bounds checking failure. */
# define SEGV_BNDERR SEGV_BNDERR
SEGV_PKUERR /* Protection key checking failure. */
# define SEGV_PKUERR SEGV_PKUERR
};
/* `si_code' values for SIGBUS signal. */
enum
{
BUS_ADRALN = 1, /* Invalid address alignment. */
# define BUS_ADRALN BUS_ADRALN
BUS_ADRERR, /* Non-existant physical address. */
# define BUS_ADRERR BUS_ADRERR
BUS_OBJERR, /* Object specific hardware error. */
# define BUS_OBJERR BUS_OBJERR
BUS_MCEERR_AR, /* Hardware memory error: action required. */
# define BUS_MCEERR_AR BUS_MCEERR_AR
BUS_MCEERR_AO /* Hardware memory error: action optional. */
# define BUS_MCEERR_AO BUS_MCEERR_AO
};
# endif
# ifdef __USE_XOPEN_EXTENDED
/* `si_code' values for SIGTRAP signal. */
enum
{
TRAP_BRKPT = 1, /* Process breakpoint. */
# define TRAP_BRKPT TRAP_BRKPT
TRAP_TRACE /* Process trace trap. */
# define TRAP_TRACE TRAP_TRACE
};
# endif
# if defined __USE_XOPEN_EXTENDED || defined __USE_XOPEN2K8
/* `si_code' values for SIGCHLD signal. */
enum
{
CLD_EXITED = 1, /* Child has exited. */
# define CLD_EXITED CLD_EXITED
CLD_KILLED, /* Child was killed. */
# define CLD_KILLED CLD_KILLED
CLD_DUMPED, /* Child terminated abnormally. */
# define CLD_DUMPED CLD_DUMPED
CLD_TRAPPED, /* Traced child has trapped. */
# define CLD_TRAPPED CLD_TRAPPED
CLD_STOPPED, /* Child has stopped. */
# define CLD_STOPPED CLD_STOPPED
CLD_CONTINUED /* Stopped child has continued. */
# define CLD_CONTINUED CLD_CONTINUED
};
/* `si_code' values for SIGPOLL signal. */
enum
{
POLL_IN = 1, /* Data input available. */
# define POLL_IN POLL_IN
POLL_OUT, /* Output buffers available. */
# define POLL_OUT POLL_OUT
POLL_MSG, /* Input message available. */
# define POLL_MSG POLL_MSG
POLL_ERR, /* I/O error. */
# define POLL_ERR POLL_ERR
POLL_PRI, /* High priority input available. */
# define POLL_PRI POLL_PRI
POLL_HUP /* Device disconnected. */
# define POLL_HUP POLL_HUP
};
# endif
/* Architectures might also add architecture-specific constants.
These are all considered GNU extensions. */
#ifdef __USE_GNU
# include <bits/siginfo-consts-arch.h>
#endif
#endif
|